SKU: Baileigh Industrial BA9-1225308
UPC: 400225000647
Weight: 3021
Baileigh Industrial BA9-1225308 CNC Plasma Table PT-48AH-W
Details
INCLUDES:
• (1) CNC Plasma Table
FEATURES:
• 60" x 100" working area.
• Runs on 220-volt single-phase power, so it will work at most sites in North America.
• Customers love the design software package (more details below), which takes just a few minutes to learn.
• You can control the X, Y, and Z axes using the integrated panel on the podium.
• Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables.
• Operators podium provides space for plasma power unit even while cutting.
• If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting.
• X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement.
• Fully enclosed wires and electronics prevent snags and tangles.
• Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal.
• Steel frame will remain straight and accurate over the years—unlike competing plasma tables with aluminum frames, which will warp from heat.
• Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine.
• Arrives pre-built at your shop, so you don’t have to spend hours putting it together and risk misalignment.
• Integrated water table helps control smoke and dust created while cutting to help keep your shop clean.
• To get started just uncrate the machine, add a plasma system, power and a clean dry air supply and lastly fill tank with water.
• Industrial plasma cutter Covered by a 1-year parts warranty.
SPECIFICATIONS:
• Table Style: Water
• Working Table: Size 60” x 100” (1524 x 2540mm)
• Overall Size: 82.75” x 133.5" x 40” (2015 x 2125 x 1300mm)
• Controller Type: Touch Pad w/7” LCD Screen
• Travel Speed: 315 Inches Per Minute (8000mm Per Minute)
• Table Dimensions: 67" x 120" (1702 x 3048mm)
• Z Axis Travel: 3.4” (86mm)
• Table Load Capacity: 1" (25.4mm) Mild Steel @ 48” x 96” (1220 x 2440mm)
• Capacity: Depends on Plasma System Chosen
• Table Height: 19.6” (500mm)
With variable height control, the PT-48AH-W makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.
• (1) CNC Plasma Table
FEATURES:
• 60" x 100" working area.
• Runs on 220-volt single-phase power, so it will work at most sites in North America.
• Customers love the design software package (more details below), which takes just a few minutes to learn.
• You can control the X, Y, and Z axes using the integrated panel on the podium.
• Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables.
• Operators podium provides space for plasma power unit even while cutting.
• If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting.
• X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement.
• Fully enclosed wires and electronics prevent snags and tangles.
• Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal.
• Steel frame will remain straight and accurate over the years—unlike competing plasma tables with aluminum frames, which will warp from heat.
• Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine.
• Arrives pre-built at your shop, so you don’t have to spend hours putting it together and risk misalignment.
• Integrated water table helps control smoke and dust created while cutting to help keep your shop clean.
• To get started just uncrate the machine, add a plasma system, power and a clean dry air supply and lastly fill tank with water.
• Industrial plasma cutter Covered by a 1-year parts warranty.
SPECIFICATIONS:
• Table Style: Water
• Working Table: Size 60” x 100” (1524 x 2540mm)
• Overall Size: 82.75” x 133.5" x 40” (2015 x 2125 x 1300mm)
• Controller Type: Touch Pad w/7” LCD Screen
• Travel Speed: 315 Inches Per Minute (8000mm Per Minute)
• Table Dimensions: 67" x 120" (1702 x 3048mm)
• Z Axis Travel: 3.4” (86mm)
• Table Load Capacity: 1" (25.4mm) Mild Steel @ 48” x 96” (1220 x 2440mm)
• Capacity: Depends on Plasma System Chosen
• Table Height: 19.6” (500mm)
With variable height control, the PT-48AH-W makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.